World’s first series application of the ColorForm process

  • One-shot process for injection molding and painting with high-gloss surfaces
  • Combination of injection molding and reaction process
  • Weidplas produces A-pillar paneling of new SUV Peugeot 3008

The ColorForm process developed by KraussMaffei has passed the series production tests. Since June 2016, Swiss company Weidplas GmbH has been producing the ready-to-install A-pillar paneling for the new Peugeot 3008 SUV at its factory in Rüti, Switzerland. The high-gloss, black lacquered surfaces are produced right in the injection mold and the components are assembled and made ready for installation in the downstream automation process.

Fully automated manufacturing

The ColorForm technology combines injection molding and reaction process machinery and enables fully automated manufacturing in a one-step production cycle. First, a thermoplastic base body forms in a mold, which is then flow-coated directly in a second cavity using a two-component polyurea (PUA) or polyurethane (PUR) paint. The result is a finished component with the desired lacquered color assignment and a premium-quality surface, produced within one minute.

Weidplas produces A-pillar paneling for new SUV Peugeot 3008

Positive first experiences with the ColorForm technology had led Weidplas to become a project partner of KraussMaffei back at K 2013. For the ColorForm production cells currently installed in the Rüti factory, the customer thus again opted for the swivel plate technology that has been implemented in a SpinForm GXW 650 – 1400/2000 injection molding machine with a clamping force of 6,500 kN. The cover with the ColorForm surface and the seal carrier lying underneath are injected simultaneously. The second injection unit of the injection molding machine is used to apply a TPE sealing element to this carrier. This produces one set per cycle with a left and right A pillar paneling. The 4.5-ton spin-platen mold with four cavities, a multi-sprue system as well as hot runner technology from HRSflow was built by the Hofmann Innovation Group from Lichtenfels, Germany. The reaction system technology for the “Panadur Black” polyurea lacquer is also from KraussMaffei. A two-component metering machine of the Hybrid Flex 0.2-4/4 variety with a servo electric metering piston is used for the abrasive A-component. A two-component MK5/8ULPK-2KVV mixing head is also used, which is flange-mounted on the injection mold.

ColorForm production cell combines injection molding and reaction process machinery

Synergies from injection molding and reaction process machinery

KraussMaffei also acted as the system provider of the completely automated cell where an IR 1500 six-axis robot from Kuka takes over the complex handling of the components. This includes aspects such as component demolding, sprue cutting as well as placement on and removal from the cooling station and rotary table. Handling during ultrasonic welding of the upper and lower parts presents a particular challenge. After an extended cooling time, the covers are initially placed into an ultrasonic welding system made by KLN. Here, they are cut, mounted onto seal carriers and welded in the follow-up process.

A-pillar paneling poses particular challenges

The paneling seals off the windshield from the pillar. Due to its high-gloss black appearance, the paneling also serves as an elegant design element of the vehicle series. The geometry of the component posed a particular challenge. The component has a length of one meter and a width of 35 millimeters. The ColorForm process has never been used to create such a long, narrow component before.

“We had the courage to begin implementing ColorForm technology because we were confident about it and we still are. I am positive that we are going to open up the field for the compact class as well thanks to the premium appearance that can be achieved through ColorForm. ColorForm will be a success,” assures Steffen Reuter, Vice President of Innovation & Technology at Techniplas, which owns the Weidplas Group.

High-gloss finish in piano black: The surface finish of the A-pillar paneling is created directly in the injection mold via flow-coating using a two-component polyurea paint finishing system


Using the one-step ColorForm process, the process costs can be reduced considerably compared to classic injection molding plus painting. The costs for a separate painting system are eliminated. The scrap rates are also reduced for multiple process steps. Firstly during painting, secondly due to the single-stage process and thirdly due to the particularly robust surface finish of the components.

Automotive · coating · PU · PUR Previous Article
Non-solvent based technology allows extrusion of TPU directly onto fabric Related Articles & Comments

Comments are closed.

Business Directory – Latest ListingsFree NewsletterPlastics Newsletter - AUTOMOTIVE EDITION (twice a month)

Email *

Name *

Categories Popular Tags aerospaceAutomotiveawardsbioplasticcarbon fibreCFRPcompositesextrusionfilmfoamglass fibreHDPEIMLinjection mouldingK2013MedicalPApackagingPCPEEKPETpipePPprofilePUPURPVCrecyclingsheetSPE Latest News Tweets by @plastics_online!function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0],p=/^http:/.test(d.location)?'http':'https';if(!d.getElementById(id)){js=d.createElement(s);;js.src=p+"://";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs");
© 2015 Plastics /* */var DavesWordPressLiveSearchConfig = {"resultsDirection":"down","showThumbs":"true","showExcerpt":"true","showMoreResultsLink":"true","minCharsToSearch":"1","xOffset":"0","yOffset":"0","blogURL":"","ajaxURL":"","viewMoreText":"View more results","outdatedJQuery":"Dave's WordPress Live Search requires jQuery 1.2.6 or higher. WordPress ships with current jQuery versions. But if you are seeing this message, it's likely that another plugin is including an earlier version.","resultTemplate":"

This project has received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement N° 690103